Nebulink B2C2 SKY2PC Installation Manual - Locating The Satellite
Locating the Satellite
Included on you Nebulink CD-Rom is a software package for setting up your dish
to locate the satellite which our service is running.
1)
To run the software, launch “Satwin.exe” from the SatFinder folder on the Nebulink CD.
2)
Click “File”
Æ
”New”
Æ
”New Look Angles” (On the menu bar)
3)
Click “Zip”, Type in your Zip Code for the location where the satellite will be. Click
“OK”
4)
Click “Sat”, Scroll until you find “SatMex 5”, Click to highlight “SatMex5”, and Click
“OK”
5)
You will see at the top of the window the Site Name and Satellite Name If this is correct
Click “OK”. If the information is incorrect please contact tech support. You can find the
contact information on the next page.
6)
Look under Satellite Look Angles. This is where you have your elevation setting for the
dish, azimuth compass bearing for pointing your dish, and the polarization offset for
setting your LNBF.
7)
Now you have all the information for pointing your dish.
5