NEC 124i Enhanced Installation Instructions Manual - 384I/704I
384i/704i
Remote Modem Installation Instructions
15
384i Only:
To enter the site modem INIT string into the 384i Remote
Maintenance program:
1.
Make sure your modem is properly connected to your computer and
functioning correctly.
Your modem can only connect to COM1 or COM2.
2.
Start the Remote Maintenance program and enter your programming
password (when requested).
3.
From the
Main Menu
, select
Option
and press
Enter
.
4.
Select
RS232 Port
and press
Enter
.
5.
Set the RS232 options for:
9600
(speed),
8
(length),
none
(Parity),
1
(Stop Bit),
Off
(echo) and
COM Port
(1 or 2), then press
Enter
twice
and press
ESC
.
You will advance to the Modem Initialize Command window.
To send and store the INIT string in the site modem:
1.
From the
Main Menu
, select
Communication
and press
Enter
.
2.
Select
Modem Control
and press
Enter
.
3.
Type
AT&F
to default the modem.
OK will display on the screen.
4.
Enter the following initialization string (spaces only shown for clarity):
AT Q1 &C1 &D0 &S1 S0=1 E0 &W0 &W1
and press
Enter
.
For earlier CNet modems (P/N 85862, 85862A, 85862B, 85862C) use:
AT Q1 Y1 &C1 &D0 &S1 S0=1 E0 &W0 &W1
and press
Enter
.
5.
To view all the modem settings and check the INIT string, type
AT&V
and press
Enter.
The INIT string you sent in step 4 is contained in the data that
displays. Review the displayed Active Profile, Stored Profile 0 or
Stored Profile 1 data to be sure your entries were correct. (Not all
types of modems are compatible with all these commands and will
disregard the entries for some items.)
704i Only:
To enter the site modem INIT string using Windows
HyperTerminal program:
1.
Make sure your modem is properly connected to your computer and
functioning correctly.
Your modem can connect to COM1, COM2, COM3 or COM4.
2.
Start the HyperTerminal program. (Click START - PROGRAMS -
ACCESSORIES - HYPERTERMINAL. Double-click on the
HYPERTRM.EXE file.)
3.
Create a name for the new connection, such as MODEM SETUP and
click
OK
.
92600MDM11.QXD 11/7/01 12:21 PM Page 15