NEC NP-PX700W Installation And Assembly Manual - Warning
3 of 8
ISSUED: 09-15-11 SHEET #:125-9244-1
J
Q
Drilltwo5/32"(4mm)dia.holestoaminimum
depthof2.5"(64mm).Attachceilingplate(
J)
toceilingwithtwo#14x2.5"woodscrews(
Q)
using3/8"(10mm)socketwrenchasshownin
figure1.1.
NOTE:Foroptionalcordmanagement,install
twospacers(
K)betweenceilingplate(J)and
ceilingasshowninfigure1.2.
Skip to step 2 for flush mount installation.
Skip to step 3 for extension column installation.
Installation To Wood Joist Finished Ceilings, Exposed Wood Joists,
or Wood Beam Ceilings
• Tightenwoodscrewssothatceilingplateisfirmly
attached,butdonotovertighten.Overtighteningcan
damagethescrews,greatlyreducingtheirholding
power.
• Nevertighteninexcessof80in•lb(9N.M.).
• Makesurethatmountingscrewsareanchoredinto
thecenterofthestuds.Theuseofan"edgetoedge"
studfinderishighlyrecommended.
• Itistheresponsibilityoftheinstallertoverifythatthe
supportingsurfacewillsafelysupportthecombined
loadofallattachedhardwareandcomponents.
WARNING
1
IMPORTANT:BesuretodrillholesintothejoistCENTER!
WOODJOIST
WOODJOIST
CEILING
CEILING
J
Q
K
fig. 1.1
fig. 1.2