Desktop chassis disassembly n required tools n disassembly instructions n reassembly instructions.
Disassembly and reassembly - 2 required tools all disassembly procedures can be performed using the following tools: n philips screwdriver n flatbed screwdriver disassembly instructions this document contains step-by-step disassembly instructions for the desktop chassis. The instructions are clarifi...
Disassembly and reassembly - 3 1. Opening the chassis to open the chassis do as follows: 1. Remove the (thumb)screws at the rear of the chassis. Fig. 1: removing the cover screws 2. Slide the cover towards the back of the chassis and lift it off. Fig. 2: sliding away the cover 2. Removing the drive ...
Disassembly and reassembly - 4 fig. 3: unscrewing the drive bay 3. Slide the bay towards the back of the system in order to free the hooks that anchor the bay to the chassis. 4. Carefully lift rear of the bay and pull the whole assembly out of the chassis. 3. Removing fdd, cd-rom, hard disk drive to...
Disassembly and reassembly - 5 fig. 5: removing the bottom screws n hard disk drive 5. Remove the two screws at the side of the hard disk drive as shown. 6. Fig. 6: unscrewing the hard disk drive 7. Slide the hard disk drive out of the bay. 8. N cd-rom drive 9. Remove the screw at the side of the cd...
Disassembly and reassembly - 6 11. Slide the cd-rom drive towards the front to disengage the lock at the opposite side of the drive. 12. When the screws appear in the opening as shown in fig. 8: tilt the cd-rom drive and pull it out of the bay. Fig. 8: sliding the drive releasing lock screws 13. Tur...
Disassembly and reassembly - 7 fig. 10: front bezel latches 5. Removing the power supply unit to remove the power supply unit (psu), first open the chassis (see section opening the chassis), then do as follows: 1. Disconnect the power supply connectors from all peripherals and the motherboard. 2. Re...
Disassembly and reassembly - 8 fig. 12: removing the front usb port 7. Removing the switch/led assy to remove the switch/led assy, first open the chassis (see section opening the chassis), remove the drive bay(see section removing the drives bay) and remove the front bezel (see removing the front be...
Disassembly and reassembly - 9 fig. 14: unlocking the switch/led assy 3. Carefully pull the assy and the cables away. Note when reassembling the switch/led assy take care that it is put back into its original position, i.E. With the switch at the left side of the leds. 8. Removing the motherboard to...
Disassembly and reassembly - 10 reassembly instructions reassembly is the reverse of the disassembly process. Use care to ensure that all cables and screws are returned to their proper positions..
