NEC powermate dt Disassembly - 1. Opening The Chassis
of
10
Disassembly and Reassembly - 3
1. Opening the Chassis
To open the chassis do as follows:
1. Remove the (thumb)screws at the rear of the chassis.
Fig. 1: Removing the cover screws
2. Slide the cover towards the back of the chassis and lift it off.
Fig. 2: Sliding away the cover
2. Removing the Drive Bay
To remove the bay containing the drives, first open the chassis
(see the section Opening the Chassis) than do as follows:
1. Disconnect all cables from the drives present in the drive
bay.
2. Unscrew the two screws as shown.
A