NEC UNIVERGE SV7000 User Manual - page 62
57
STEP 22:Press BK soft key once to delete the default
file name and then enter a new file name by
using the digit keys.
STEP 23:Press
or Exec soft key to start the down-
loading process.
While downloading a file, the LCD displays
“Downloading...” first and then “Saving...”.
STEP 24:After the downloading process is complete,
the display changes as follows:
STEP 25:Reset the DT750 by pressing Exit soft key.
TIP
For details on character entry method, see
TIP
A maximum of 20 characters ("0-9", "A-Z", "a-z", "*", "#",
".", "-" or "_") can be entered as a file name.
TIP
To delete an entered character, press BK soft key.
Note
Be sure not to turn OFF the DT750 while "Saving..." is
displayed on the LCD.
Exit
Download Complete!
Press Exit to Rese.
Note
When the downloading process ends in failure, "Down-
loading Failed!" is displayed on the LCD. Check to see
the following and then make a retry.
Check Points
Actions
Download file is not placed
in the specified directory.
Place the download file in
the specified directory.
A different file name is
specified between DT750
and FTP/TFTP server.
Set the same file name
from both DT750 and FTP/
TFTP server.
Incorrect IP address of
FTP/TFTP server has been
entered from the
telephone.
Set the proper IP address
of FTP/TFTP server.
The power to FTP/TFTP
server or network
equipment is OFF.
Turn on the power.
LAN cable is disconnected.
Reconnect the cable
securely.