NEC UNIVERGE SV7000 User Manual - page 64
59
STEP 6: Select a protocol used by the destination
server.
Select an item by one of the following operations.
• Touch panel operation
• Highlight an item by using
, and then press
or OK soft key.
• Press
or
key, and then press
or OK soft
key.
STEP 7: The display goes back to the Backup/Re-
store screen.
When
FTP is selected here, go to the
next Step (STEP 7).
When
TFTP is selected here, go to the
next STEP 15.
STEP 8: Select
FTP Settings.
Select an item by one of the following operations.
• Touch panel operation
• Highlight an item by using
, and then press
,
or OK soft key.
• Press
key.
STEP 9: Select
User ID.
Select an item by one of the following operations.
• Touch panel operation
• Highlight an item by using
, and then press
,
or OK soft key.
• Press
key.
↓
Back
OK
1
2
3
1/1
↓
4
Data Backup
Data Restore
Server Address
FTP Settings
Protocol
5
[Backup/Restore]
1
2
1
2
OK
Back
↓
1/1
FTP
TFTP
[Protocol]
1
2
5
5
OK
Back
1/1
1
2
3
4
Server Address
Protocol
↓
[Backup/Restore]
5
FTP Settings
Data Backup
Data Restore
1
1