North Star Design SAPPHIRE Operating Manual - page 6
Front & Rear Panel Function Controls
Before attempting any system interconnection, please familiarize yourself with the front and rear
panel controls of the SAPPHIRE SACD PLAYER. The descriptions below refer to the numbers and
letters associated with the features in the diagram above.
Front Panel
1 STAND-BY PUSHBUTTON
When in stand-by mode, push to switch in Operate mode. When in Operate mode, push to switch in
Stand-by mode.
WARNING: Always put in stand-by the SACD Player before switch-off the unit by rear panel
switch.
2 PREV PUSHBUTTON
When pressed select the previous track
3 NEXT PUSHBUTTON
When pressed select the next track
4 REPEAT PUSHBUTTON
Press this button once and all the tracks will be repeated. The display will show «RPT TRACK».
Press the button again, and it will repeat the disc. The display will show «RPT DISK». Press the
button again, and the display will show «RPT OFF».
5 DISPLAY
6 SACD DISC LED INDICATOR
Glows blue
when the Player read the SACD layer.