North State TV2GO User Manual - Display Settings
16
Display Settings
SCREEN ASPECT RESOLUTION
Using your TV’s user guide as a reference, you can adjust your screen settings by choosing the most suitable resolution
from this list and then following steps 1 through 8:
• 4:3 standard definition
• Widescreen standard definition
• 720p High Definition
• 1080i High Definition
1 Press MENU
2 Use RIGHT ARROW to highlight Settings
3 Use UP/DOWN ARROWS to select Television and press OK
4. Use UP/DOWN ARROWS to select Screen aspect ratio and High Definition and press OK.
5 Use UP/DOWN ARROWS to select the setting that is appropriate for your TV
6 Navigate to Continue and press OK
7 Navigate to Start Test and press OK The system will verify whether your TV can display the selected setting
8 If you can see the video on your screen, use UP/DOWN ARROWS to select Keep Setting and press OK to save Or, if you
see a black screen, your TV may not be able to display the selected setting or it may not be properly connected to your
digital receiver Use UP/DOWN ARROWS to choose another setting or check your cables to ensure proper connection
between your TV and digital receiver
Quick tip: To remove the black bars that appear on both sides of the screen when you watch standard definition programming
on an HD TV, press ENTER OPTIONS and use UP/DOWN ARROWS to select the optimum setting for your TV
DESCRIPTIVE VIDEO
Descriptive Video is a feature available on select programs for the visually impaired that provides audio descriptions of the
visuals in a program
1 Press MENU
2 Use LEFT/RIGHT ARROWS to select Settings
3 Use UP/DOWN ARROWS to select Audio and press OK
4 Use UP/DOWN ARROWS to select Audio Description and press OK
5 Use UP/DOWN ARROWS to select Descriptive Video and press OK
6 Navigate to select Save and press OK
DIGITAL AUDIO OUTPUT
Digital audio output allows you to adjust your audio settings
1 Press MENU
2 Use LEFT/RIGHT ARROWS to select Settings
3 Use UP/DOWN ARROWS to select Audio and press OK
4 Use UP/DOWN ARROWS to select Digital Audio Output and press OK
5 Navigate to select Stereo or Surround Sound and press OK
6 Navigate to select Save and press OK