North State TV2GO User Manual - page 5
3
Your Fiber TV Digital Receiver
The following illustrations outline your digital receiver (HD or HD DVR) functions and connections. Digital receivers may
not be exactly as shown below.
1 Power: Turns your digital receiver on or off and is lit when power is on
2. Model number: Identifies hardware model.
3 Link: Lit when the digital receiver is connected to the North State network
4. HD: Lit when the digital receiver is configured to display HD content.
5 Record: Lit on all digital receivers when a DVR recording is in progress
6 Menu: Displays onscreen menu
7 Navigation: Moves selection up, down, left or right
8 USB: Not currently enabled
Model numbers: SA430, SA330, Cis430, Cis330 and ISB 7,000
1 Network In: Connects the network cable from your home network or modem
2 USB: Not currently enabled
3. HDMI (Out): HDMI is the HD connection that contains both audio and video signals.
4 Use for HDTVs Component Video Out: Component video cables can be used for high quality signals
to either HD or non-HDTVs
5 S-Video Out: S-Video is preferred for older TVs
6 RCA Video / Audio 1 Out: These connections are ideal for VCRs and older TVs The audio ports can
be used independently if other video connections have been used
7 RCA Video / Audio 2 Out: These duplicate connections are available for users with multiple devices
8 Optical: This is an all-digital audio connection, ideal for audio receivers
9 Video Out: Connects to the antenna jack on the TV
10 Video In: For North State installer use only
11 Power In: Connects to the supplied adapter to power the unit
LINK
HD
RECORD
MENU
OK
POWER