Northern Computers N-750 Configuration manual - page 8
4
Version 1.0
October 1997
N-750 Configuration Guide
N-750 DIAL UP
N-750 DIAL UP
N-750 DIAL UP
N-750 DIAL UP
N-750 DIAL UP
INST
INST
INST
INST
INSTALLA
ALLA
ALLA
ALLA
ALLATION
TION
TION
TION
TION
With On-Board
With On-Board
With On-Board
With On-Board
With On-Board
Communicator
Communicator
Communicator
Communicator
Communicator
Computer and Software
PC-AC-750
Stand alone PC for N-750 software includes:
CPU, keyboard, mouse, SVGA monitor, parallel printer,
and printer cable.
AND/OR
N-750-SK
Upload/download programming software for the N-750.
Only one copy is required per dealer. The N-750-SK can
support an unlimited number of accounts.
N-750
1
N-750
Security/Access Control Panel
1
N-750-COMM-CBL RJ31X Cable for Digital
Communicator
1
BAT-N-750
12 V, 7 A Battery Backup
1
M-9600
Hi-Speed Communications
External Modem
1
CBL-2
M-9600 Serial Interface Cable
ACAS Software/Printer Connection
1-8
N-750-PI
Communications Interface
1
CBL-N-750-PI
Direct Connect Cable–10'
1
N-750-ACAS
End-user Programming Software
1-8
P-1000
Parallel Event/Report Printer
1-8
CBL-1
Parallel Printer Cable
Touchpads/ADMs
1-24* N-750-PAIT
Programming & Access Touchpad
1-23* N-750-ADM
Access Door Module
*Not to exceed a combined total of 24 PAITs & ADMs
See page 10 for supported reader and card types
Zone Expanders
1-3
N-750 SSE
Smart Sensor Serial Zone
Expander
1-40 N-750-SS-10
Smart Sensor 10 Pack
with Resistor
1-40 N-750-EOL-UL-SS 10 pack EOL UL Resistor 1.43 k
for Smart Sensor Expander
1-6
N-750-ZONE
Hardwire Zone Expander
1-40 N-750-EOL-UL
10 pack EOL UL Resistor 4.7 k
for hardwire Zone Expander
Not to exceed a combined total of 384 zones
Consult product guide for additional devices
Optional Accessories
N-750-APS
12 VDC Auxiliary Power Supply for
N-750
N-750-APS-24
24 VDC Auxiliary Power Supply for
N-750
N-750-BELL
Bell Supervision for N-750
N-750-BELL-SUP
Bell Suppressor for N-750-BELL
N-750-DPLM
Dual Phone Line Module for UL
Communications
N-750-ENC
Accessory Enclosure for the N-750
N-750-GSM
Ground Start Module for N-750
N-750-KOHP
Knock Out Hole Plug for N-750
(UL 6 Pack)
N-750-TC
UL Tamper Proof Box for X-750
Transformer
(See pages 13-15 for complete descriptions)
The N-750-PAIT
N-750-PAIT
N-750-ADM
N-750-ADM
N-750-PAIT
You must have at least one
N-750-PAIT per system.
is a
programmable touchpad that
can be used to arm/disarm the
system, or perform a number
of programming functions.
Up to 24
s per
N-750
1 SPDT Relay
2 Dry Contacts
+5VDC or +12VDC Output
Used in conjunction with
s, not to exceed
a total combination of 24
s and
s.
N-750-PAIT
Reader
Exit Switch
Monitor Contact
/Door Zone
Door Strike
/Maglock
PWR
26, 32 and 34 bit
Wiegand Reader
N-750-SSE
Programmable
Touchpad
CBL-1
P-1000
CBL-2
M-9600
PC-AC-750 PC running
N-750-SK Upload/Download
Software for the N-750
N-750-PAIT
The N-750-SSE
N-750-SSE
N-750-SS
N-750-SSE
SSE
N-750-SS
N-750-SS
N-750-EOL-US-SS
N-750-ZONE
is a Serial Zone Expander
for the N-750. The
supports 2
serial lines with a total of 64 points per line
and 128 points per unit. The serial lines may
be run up to 5000' with an
Smart
Sensor dropped no more than 200' from the
device to which it is connected.
128 Zones per
, 3 N-750
s
per N-750 for a total of 384 zones
Used in conjunction with the
Smart Sensor
Serial Line can go up to 5000' total
distance
Supervised through
, for UL
applications use the
10 pack
Can be used in conjunction with
, not to exceed a combina-
tion of 384 hardwired and serial zones
N-750-SS
1.43k EOL Resistor
N-750-EOL-UL-SS
Fire Sprinkler
Glass Break Sensor
A
B
(See p. 10 for available readers)
N-750-SSE
S-4 Suppressor