Northern DTW212H960 User Manual - Main Menu
MAIN MENU
1. LENS
2. EXPOSURE
3. BACKLIGHT
4. WHITE BAL
5. DAY&NIGHT
6. SMART 3DNR
7. F-DNR
8. FUNCTION
9. EXIT
MANUAL
OFF
ATW
COLOR
ON
OFF
SAVE
Function of adjusting shutter speed and AGC.
Menu Set up
Menu Set up
BACKLIGHT
Strong/large sources of light coming from behind the main subject
(such as a person indoors that is in front of a window) cause the light
meter to underexpose for the main subject
DWDR
1. LOW LEVEL
2. HIGH LEVEL
3. RETURN
1
RET
WHITE BAL
1
1. OFF
: Deactivates the BACKLIGHT function
2. DWDR
: Helps to eliminate over & underexposed areas of the picture.
2-1. LOW LEVEL
(0~15): In WDR mode, AGC in low
2-2. HIGH LEVEL
(0~15) : In WDR mode, AGC in high.
2-3. RETURN
3. BLC
: Back Light Compensation / User controllable mode, shown the
subject clear in anywhere.
3-1. VALUE
(LOW, MIDDLE, HIGH) : Adjust the brightness.
3-2. AREA
: Set up the area of using BLC
a. SINGLE : Set up the first BLC area. (area & size adjustable)
b. DOUBLE : Set up the second BLC area. (area & size adjustable)
3-3. DEFAULT
: Reset as default
4. HSBLC
: High Light Compensation / Masking the highlight in the image to
distinguish the subject
4-1. GAIN
(0~100) : The higher GAIN level is, the masking is covered only
highlights. The lower the GAIN level is, the masking is covered on low
illuminations. So, the lower GAIN level is, the more masking areas covered.
4-2. MODE
(ALL DAY, NIGHT ONLY) : Select one
4-3. MASK-LEVEL
(0~100) : Adjust the brightness on the selected area.
4-4. DEFAULT
: Reset as default
4-5. M.SKIP AREA
: Adjust the selected area not to get masked by HSBLC.
(area, size, on, off)
ATW
: Select this when the color temperature is between 2,500°K and 9,500°K
AWB
: Select when the color temperature is between 1,800K°~10,500K°
AWC->SET
: To find the optimal luminance level for the current environment,
point the camera towards a sheet of white paper and press the set button.
If the environment changed, readjust it.
MANUAL
: Adjust the proportion for RED and BLUE