Northern DTW212H960 User Manual - Smart 3Dnr
SMART 3DNR
1. VALUE
2. SMART NR
3. SMART LEVEL
4. SENSITIVITY
5. RETURN
80
ON
200
80
RET
When motion is detected, reduces the background noise, dragging
and stretching of image in a low luminance environment.
VALUE (1~200)
: Adjust level of this function
SMART NR (ON/OFF)
: Set the function to “ON” or “OFF”
SMART LEVEL (1~200)
: Adjust the level of this function
SENSITIVITY (0~100)
: Adjust the sense of this function
Menu Set up
Menu Set up
DAY & NIGHT - Switching of day operation/ night operation
COLOR
: color mode always on
AUTO
: Automatic switching between day operation (color mode) and night
operation (black and-white mode) depending on the ambient brightness
DELAY (0~15) : Adjust the condition time in order to switch day and night.
D->N(AGC), N->D(AGC) : By AGC, adjust the switching point between
day and night. (0~255)
D->N(CDS), N->D(CDS) : By CDS, adjust the switching point between
day and night. (0~255)
SMART 3DNR (ON/OFF)
MAIN MENU
1. LENS
2. EXPOSURE
3. BACKLIGHT
4. WHITE BAL
5. DAY&NIGHT
6. SMART 3DNR
7. F-DNR
8. FUNCTION
9. EXIT
MANUAL
OFF
ATW
COLOR
ON
OFF
SAVE
B/W
: black-and-white mode always on
BURST (ON/OFF) : Turn on or off BURST signal.
IR SMART (ON/ OFF) : When IR LED is turned on in B/W, the objects
can be clearly identified due to the function
that decreases screen saturation of objects
within a short distance.
a. VALUE (0~100) : Adjust IR SMART level
b. AREA : Adjust the position and size for IR SMART
c. IR DWDR : Adjust the brightness by applying Digital Wide
Dynamic Range when IR SMART is on.
IR LED (ON/OFF) : Turn on or off IR LED at night mode.