Northern DTW212H960 User Manual - D212H960 / D212Hir960
VIDEO
SPECIFICATION
D212H960 / D212HIR960
Specification
Troubleshooting
Image Sensor
960H 1/3” COLOR SONY SUPER HAD CCD II
Effective Pixel
976(H) X 494(V) PIXEL(NTSC), 976(H) X 582(V) PIXEL(PAL)
Scanning System
2:1 Interlace
Sync. Type
Internal
Resolution
Color: 700TV-Line, B/W: 800TV-Line
S/N
More than 52dB or More (AGC OFF)
Video Output
1.0 Vp-p(Sync. Negative) Termination 75
Ω
Min. Illumination
0.01 Lux(F/1.6), 0.0001Lux(Sense up), 0Lux(25M Range with 24pcs LED, Indoor)
LENS TYPE
Lens
Vari focal auto iris lens
OPERATIONAL
On screen display
Yes (16 Languages)
White Balance
ATW(2,500°K~ 9,500°K)/MANUAL/AWB
Shutter Speed
1/60(1/50) ~ 1/100,000SEC sec
Sense up
Auto (Selectable limit 2X~1024X)/OFF
Backlight
BLC / HSBLC /DWDR / OFF
AGC
Low/Middle/High/Off
DNR
Smart 3DNR
Motion Detection
ON / OFF (4 Zone Selectable)
Privacy Masking
ON / OFF (8 Zone Selectable)
Mirror
OFF/MIRROR/FLIP/ROTATE
DAY & NIGHT
ICR (AUTO, COLOR, B/W, EXT)
F- DNR
OFF/MANUAL/AUTO(1~5)
SMART D-ZOOM
ON(X2~X5)/OFF
Digital Zoom
ON(X1~X32) / OFF
DIS
OFF/ON
FREEZE
OFF/ON
IRD-WDR
OFF/ON (1~15)
DEFECT
Sense up (X4~X128), DIFF(0~3), THRESHOLD(1~4)
Nothing appears on the screen.
The screen seems blurry and darker.
The Image focus is not correct.
Check if the camera and monitor’s powers are on. (Also, the voltage and polarity.)
Check if the video-out terminal of the camera and the video-in terminal of the
monitor are correctly connected.
Check if the iris of the lens is open.
Adjust Contrast and Bright level in the menu.
Check the setting of Image adjust in the menu.
Check if there is any dust or scratches on the camera window
Adjust the camera lens either far or near to make focus.
Check the camera window for any finger prints or dusts found.
Please clean off dust and any other debris on the window.
Motion detection function does not operate.
Check if the MOTION DET setting is properly in the menu.
Check the setting of motion detection area.
The image does not seem to be shown correctly.
Check if the video cable is connected correctly.
Long distance wire runs may require amplification.
Overall, the picture’s color does not seem correct.
Check if the setting of WHITE BALANCE is correct in the menu.