Northland Crown Royal 1000 Installation And Operation Instructions Manual - page 5
Pristine series installation and oPeration Manual • 2011
3
InTroduCTIon
the Crown royal Pristine series Hot Water Furnace
You have selected one of the best wood stoves/furnaces on the market
today! It has been specially designed to produce highly efficient heat with
emissions well below environmental standards, and we are proud to offer
a 10 year limited warranty!
To ensure maximum benefit from your new Pristine furnace, read the
Installation and Operation Instruction Manual cover to cover and follow all
instructions carefully.
The Pristine furnace has been designed for indoor installation and has
also been tested to meet UL Standard 391 - 2006 Standard C22.2 No.3
and CSA B366-1-M91 for indoor central solid fuel fired furnaces.
Please keep this manual for future reference.
How the Pristine Furnace Works
The Pristine uses a process called wood gasification to
produce highly efficient combustion in the furnace’s dual
burn chambers. (1) Wood in the firebox burns from the
bottom up, drying the top layer of wood in the firebox and
forcing gases and exhaust into the lower burn chamber. (2)
In the brick-lined lower chamber, these volatile gases are
burned at temperatures as high as 2000°F (1093°C).*
The fire brick lining in both burn chambers absorbs the heat
and maintains burn chamber temperatures for consistent
gas combustion. This high-temperature gas combustion
significantly lowers emissions, prevents creosote buildup,
and minimizes ash buildup in the unit. (3) After passing
through the burn chamber, exhaust air escapes through
multiple flues running through the water jacket, heating
the water quickly and efficiently. (4) The exhaust cools as it
passes through the flues, and when it leaves the chimney,
temperatures have fallen to 350°F (177°C).
*varies based on fuel type, burn rate and other conditions
Read more on gasification on page 18.
Crown Royal Pristine
Series MODEL 1000
1
2
3
4