Norvell PRESTIGE 2100 Instruction Manual And Users Manual - 9. Start-Up

8

PRESTIGE 2100

US

9. Start-up

Before connecting to the power supply, be 

sure that the supply voltage is identical with 

the value given on the rating plate.

Always lower the carry handle in the cover 

before opening the cover. Press the locking 

device on both sides to this purpose.

1.   Open the closure (Fig. 2, 1) and fold open 

the cover of the device. 

2.   Open the air hose retainer (Fig. 2, 2). 

3.   Remove the air hose and connect it to the 

air hose connection (Fig. 3). 

4.   Close the air hose retainer again.

5. Unroll the power cord and slide the cord 

grommet into the provided recess (Fig.  4)

WARNING: DO NOT close the 

cover if the cord grommet is 

not positioned correctly. The 

power cord could otherwise be 

damaged!

6.   Remove the spray attachment from the 

deposition tray. 

7.   Unscrew the container from the spray 

attachment.

8.   Prepare spray tanning solution according 

to manufacturer's instructions and pour 

into the container.

9.   Screw the container firmly onto the spray 

attachment.

10.  Connect the front part of the gun and the 

gun handle to each other. (Fig. 5)

11.  Close the device cover and pull the carry 

handle upwards. This makes the gun 

holder accessible.

12.  Put the spray gun onto the gun holder at 

the turbine.

13.  Place the turbine only on a clean, flat 

horizontal surface. Otherwise, the turbine 

may suck in dust, etc.

2

1

2

3

4

5