Norvell PRESTIGE 2100 Instruction Manual And Users Manual - 10. Operation
9
PRESTIGE 2100
US
14. Switch on the mains switch by pressing
"I" at the turbine (Fig. 6).
10. Operation
How the Spray Tanning system is handled,
including preparation of the work place
and spray tanning solution as well as the
final result, is the sole responsibility of
the operator.
Norvell excludes any liability for damage
which may arise from overspray, applica-
tion errors, touch-ups, or non-compliance
with the instructions provided here.
•
Press the On/Off switch at the gun handle
(Fig. 7, 1).
•
Turn the material control (Fig. 7, 2), in
order to adjust the desired delivery rate.
lower material volume (-):
turn anti-clockwise
higher material volume (+):
turn clockwise
Your goal is a 4 inch wide spray
pattern spraying 4 inches away.
•
Turn the air volume control (Fig. 7, 3), in
order to optimize the atomization and
reduce overspray.
less air (-):
turn anti-clockwise
more air (+): turn clockwise
•
Turn the air cap (Fig. 8, 1) with the union
nut (2) slightly unscrewed, to adjust the
shape of the spray jet:
Fig. 9a vertical flat jet:
For spray movements from left to
right
Fig. 9b horizontal flat jet:
For spray movements from top to
bottom
•
Pull the trigger to spray the tanning
solution.
a
b
9
6
7
1
2
3
8
1
2