Norvell PRESTIGE 2100 Instruction Manual And Users Manual - •
10
PRESTIGE 2100
US
11. Tips on using the spray tanning system
Before commencing application, check that all necessary protective
measures (nasal plugs, hair covering) have been taken.
i
Practice on a large piece of newspaper or cotton towel first in order to find the
optimal settings for the spray tanning solution used.
•
If a tanning extraction fan is available,
place in the near vicinity of spraying and
switch on.
•
Avoid interruptions during the spray
movement. Maintain a constant pace.
•
The spray movement should come
from the arm, not just from the wrist.
This ensures that a uniform distance is
maintained between the spray gun and
the body during the spray operation.
Fig. 10 a: CORRECT even distance
Fig. 10 b: INCORRECT uneven distance
will result in uneven tanning
•
Move the spray gun at an even speed.
•
When tanning is complete, switch off
turbine and any tanning extraction fan (if
used) after fumes/mist have cleared.
12. After application of the spray tanning solution
i
The full tanning effect develops
during the first 6-12 hours after
the treatment.
•
Allow the spray tanning solution to dry for
5-10 minutes before getting dressed again.
i
You can also use the air from the
air hose to accelerate the drying
process of the spray tanning
solution. To do this, simply
remove the spray attachment
from the handle and switch the
system on.
•
Do not shower or bathe in the first 6-8 hours after application, as this will affect the
tanning result. This will vary depending on the tanning solution used.
•
Prolonged hot baths and showers should be avoided, in order to maintain the tanning
effect for as long as possible. Daily moisturizing of the skin is also recommended.
4 inches
a
b
10