Novag TOURMALINE Instruction - Continuing The Game:
15
Note: This procedure can be followed any time in EP mode. For example to
restart position entry if you have made a mistake.
Example:
If you wish to set up a new position, you have to clear first the entire board
otherwise the NOVAG TOURMALINE will retain the last board position in its
memory and then you can enter any board position you like.
This is the procedure step by step:
→ FP/EP key → FP/EP key
→ CL key → CL key
→ piece symbol key → coordinates of square
→ piece symbol key → coordinates of square → etc.
→ G7 key (Black/White)
→ piece symbol key → coordinates of square → etc.
→ G7 key (Black/White): to continue the game
→ ENTER
D.
Continuing The Game:
When you have entered your position and are satisfied that it is correctly
entered, press the ENTER key to return to the PLAY mode, the display will
show "
" indicating White's turn to move. You may now either enter a
move or press the ENTER key again to cause the computer to make the move
for White.
If you wish to resume play from your entered position with Black to make the
next move press "G7" and ENTER. The display will show "
"
indicating Black's turn to move. You may either move for Black or press
ENTER to have the computer move for Black.
15. ENTER FUNCTION (Enter Key)
The ENTER key is generally used to enter a command (LEVEL, FP/EP function) or
to exit from a function:
Furthermore it is used:
− To change sides during the game.
− To make the NOVAG TOURMALINE compute for the side to move. Repeated
press on the ENTER key will make the computer play against itself.
− To change sides at the beginning of the game. Press NEW GAME and ENTER
and the computer will play with the White pieces.