NovaSail NS100 Operating Manual - Trp
NS100
Operating Manual
10
TRP
, Lower line: TRiP distance
The total distance in nautical miles (NM) is displayed. This value is saved when
the device is turned OFF. It can be reset by pushing the
button.
Note
:
Both the TRP and SPM value blink until enough satellites are detected.
Waypoint mode: Wxx
This mode allows the direction and distance to reach the 20 memorized
waypoints to be displayed: W00 to W19. Each time a waypoint is selected, the
direction and distance needed to reach it are displayed sequentially.
To use a waypoint
•
By default, W00 is displayed on the mode line.
•
Press and hold
to select the required waypoint, from W00 to W19.
The name of the waypoint is displayed with 3 characters.
•
The direction and distance are displayed sequentially.
To Memorize a waypoint while sailing
•
Press and hold
to select the waypoint (from W00 to W19).
•
Press
to memorize the current position into the selected waypoint.
The previous coordinates are automatically overwritten by the new ones.
•
The direction and distance to the waypoint are displayed sequentially.