NovaSail NS100 Operating Manual - Main Screen
NS100
Operating Manual
8
Switching backlight on and off
•
Press and hold
for more than 1 second until the icon
is displayed
on the screen. If the OFF sequence starts, simply release the button
before the sequence “3”, “2”, “1” is finished.
•
To turn off the backlight, press and hold
for more than 1 second until
the icon
disappears from the screen.
Note :
When you press and hold the
button to switch on/off the
backlight, you will not make any selection and therefore will not change any
parameter.
Main screen
This mode provides the speed and heading of the vessel.
SPE
, Upper Line: The speed over ground is displayed with a resolution of 0.1
knots (KT). The minimum speed is 1 knot, the maximum speed is 99.9 knots. The
value displayed can be averaged; see “Speed sensitivity: SPE”, page 14.
COG
, lower line: The course over ground (heading in degrees) as measured by
the GPS receiver is displayed. The value displayed can be averaged; see “GPS
Heading sensitivity: COG”, page 14.
Timer mode
This mode provides an adjustable downcounter and an upcounter timer with the
heading of the vessel on the lower line.
TIM
, upper Line: The timer starts in downcounting mode; the starting value can
be adjusted to count down from 5, 4 or 1 minutes by a long press on the
button.