O-Synce ANT+ remote User Manual - Turn Off Your Ant+Remote
of
6
After replacing the battery, the ANT+remote must be paired to the head
unit (e.g. navi2coach) again.
Key functions
Turn off your ANT+remote
The ANT+remote will switch automatically to standby mode after 30 seconds, when the
head unit is no longer activated.
Replacing the battery
If the status LED flashs during operation periodically red, the battery will
drain almost completely and should be replaced.
The battery of the ANT+remote can be changed without special knowledge and only by
using a 50 Euro cent coin. For this purpose insert the standard CR2032 battery in the
remote control and close the lid.
After replacing the battery, the ANT+remote must be paired to the head unit
(e.g. navi2coach) again.