O-Synce ANT+ remote User Manual - page 5
Overview of Status-LEDs
The following table shows an overview of the different operating conditions of the
ANT+remote. Please make sure that the ANT+remote is activated by pressing the
middle key.
If the connection of ANT+remote to your head unit will not be established
correctly or even terminated, the ANT+remote will switch automatically to
standby mode after 30 seconds.
LED color
Operating condition
Trouble shooting
Flashing
green
ANT+remote is ready to use and
connected to the head unit.
-
Flashing
green
and
red
together
ANT+remote is ready to use but
searches for the „paired“ head
unit.
a) Please bring the head unit
within the transmission
range (1m)
b) Devices are not paired.
Please see chapter „pairing“
Flashing
red
Battery weak
Please replace the battery
No flashing even
though botton
press
Battery completely discharged
Please replace the battery
Electromagnetic Interferences
Disturbance may occur near electrical devices such as LED lights, motors or
electrical brakes. Also smartphones or WLAN access points may cause
interference when using ANT+remote. To avoid problems move away from
possible sources of disturbance.
Technical specifications
Dimensions: 48 x 38 x 2,1 mm (L x W x H)
Weight: ca. 15g (incl. CR2032 battery)
Water resistance: 1m
Compatibility: Ant+
TM
Radio frequency: 2,4GHz ANT
TM
Transmission range: 3m
Operating temperature: -10°C – 60°C
Battery: CR2032 Lithium Battery (contains perchlorate).
Battery lifetime: up to 100 hours of operating
This product is ANT+™ certified.
Visit
http://www.thisisant.com/directory
for a list of compatible products and
apps.