Oasis OASIS-30 User Manual - page 5

1

1310836-07 | Mar 02 2016

UNPaCK & INSPECTION

all MTL Cool equipment is packaged in a manner to 

prevent from damage in transport and for the unit to 

remain visible for a visual inspection. Equipment is 

palletized, shrink wrapped and sometimes boxed.

The equipment should be unpacked as soon as possible. 

Verify that all equipment including internal components 

and glass were not damaged in transit.

If any damage is found please contact MTL Cool at 

1-888-

685-8324 immediately to report the damage. If possible 

please take pictures of the damage.

PALLET REMOVAL

The Oasis Grab N’ Go cooler is secured to the pallet 

beneath it.

Please follow the instructions below to safely detach the 

cooler from the pallet

1

 Locate the 8 Phillips head screws securing the wood 

blocks to the pallet. There are 4 on each side of the cooler. 

2

 Unscrew the 8 screws using a Phillips head screw driver 

or power drill.

3

 Slide the wood blocks out of the tracks. The cooler is 

now detached from the pallet.

WARNING

At time of delivery, carefully examine the 

equipment for any damage that may have 

occurred in transit.

All damages should be noted on the bill of 

lading or delivery receipt.

1

2

3

Unpack & Inspection