OBH Nordica 2634 User Manual - page 21
21
Winding of the cord
Please note that the toaster comprises a cord winding device in the bottom, which makes it
easy to store when not in use.
Cleaning and maintenance
Make sure the toaster is cold before cleaning. The ON/OFF lever (3) shall be in its upper
position (OFF) and the plug taken out of the mains supply before cleaning the toaster. Bread
crumps drop into the crump tray at the bottom of the toaster. Pull out the crump tray and
clean it with a brush or similar before pushing it back into the toaster.
Wipe the outer faces with a damp cloth and polish with a try, soft cloth. Do not use scouring
powder or aggressive detergents which may scratch the surface of the appliance.
Safety instructions
1. Read the instruction manual carefully before use and save it for future use.
2. Plug the appliance to a household outlet of 230V and use the appliance only for the
intended use.
3. Always unplug the appliance from the mains supply when not in use.
4. The appliance must not be immersed into water or other liquids.
5. This appliance is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge, unless
they have been given supervision or instruction concerning the use of the appliance by
a person responsible for their safety.
6. Children should be supervised to ensure that they do not play with the appliance.
Children are not always able to understand potential risks. Teach children a responsible
handling of electrical appliances.
7. Check that the cord is not hanging over the edge of the table.
8. Do not place the appliance on or near hotplates, open fire or the like.
9. WARNING: Bread may burn. Therefore, do not use the toaster near or below
curtains, kitchen cupboards or other combustible material. The toaster should
only be used under supervision.
10. Caution: Do not touch the hot surfaces of the appliance.
11. Never use metallic objects inside or on the toaster and never touch the heaters.
12. CAUTION: In order to avoid a hazard due to inadvertent resetting of the thermal cut-
out, this appliance must not be supplied through an external switching device, such as a
timer, or connected to a circuit that is regularly switched on and off by the utility.
13. Always examine appliance, cord and plug for damage before use. If the supply cord
is damaged, it must be replaced by the manufacturer, his service agent or a similarly
qualified person in order to avoid a hazard.
14. The electrical installation must comply with the present legislation concerning additional
protection in the form of a residual current device (RCD) with a rated residual operating
current not exceeding 30 mA). Check with your installer.
15. This appliance is intended to be used in household and similar applications such as:
- staff kitchen areas in shops, offices and other working environments;
- farm houses;
- by clients in hotels, motels and other residential type environments;
- bed and breakfast type environmentsIf
16. If the appliance is used for other purposes than intended, or is it not handled in
accordance with the instruction manual, the full responsibility for any consequences will
rest with the user. Any damages to the product or other things are not covered by the
warranty.
2634_2636 IM_151210.indd 21
15-12-2010 08:42:58