Océ PP20D Operation Manual - page 30
of
98
Print Quality Problems
3-5
Characters out of position.
Check the file or program.
Check whether the problem is being caused by a
PRESCRIBE command error. If the problem occurs only
with a specific file or program, the most likely cause is an
error in a parameter to a command or command syntax.
Check the paper size setting.
Check that the paper size set in the paper source and the
paper size set on the KM-NET for Clients are the same.
(See the
KM-NET for Clients Operation Guide
.)
Printed Results
Corrective Action
Table 3-2 (Continued)