Océ PP20D Operation Manual - page 33

Indicators

3-8

Paper path error

There is no cassette in the feeder, or the 

cassette is not inserted properly.

After reinserting the paper cassette, you should be 

able to print.

Replace toner

There is no more toner in the toner container.

The printer has stopped because there is no more 

toner. Replace with a new toner kit. After replacing, 

be sure to clean the printer. (See 

Chapter 2

)

Set paper

Press GO

There is no paper in the MP tray.

Add paper to the tray. Press the 

 key to resume 

printing.

Feeding the paper having a paper size 

which does not match the current paper 

size from the MP tray can cause paper jam.

Toner low

There is not enough toner inside the toner 

container. 

Promptly replace with a new toner as the printer 

will stop printing before long. Clean the printer 

after replacement. (See

 Chapter 2

)

(No indication patterns 

available)

Warning

image adapt

The print job cannot be done at current 

resolution because there is not enough 

internal memory.

Try adding memory or changing resolution.

(No indication patterns 

available)

Warning

low memory

The printer’s memory is running low because 

of the number of downloaded fonts and 

macros.

Print a status page to see how much user memory is 

left and try deleting unnecessary fonts and macros.

Warning waste 

toner box

The waste toner reservoir is almost full.

The waste toner reservoir will become full and the 

printer will stop printing.

Contact your Kyocera Mita dealer.

Indicator

KM-NET for Clients display

Corrective Action 

Table 3-3 (Continued)

Note