Oce cm2510 Facsimile Manual - Transmission Methods

13

This chapter explains the basic procedures for sending a fax.

TRANSMISSION METHODS

The methods that can be used to send a fax from the machine are explained below. Select the method that best suits your needs.

To fax a large number of sheet originals, use the automatic document feeder.

The originals will be scanned into memory and then transmitted (memory transmission).

When memory transmission is selected and multiple originals are placed in the automatic document feeder (and the line 

is free), transmission will begin as soon as the first page is scanned and will take place while the remaining pages are 

being scanned (Quick Online transmission).

If transmission cannot begin immediately because the line is in use, all pages will be scanned into memory and the 

transmission will be reserved.

☞

USING THE AUTOMATIC DOCUMENT FEEDER FOR TRANSMISSION

 (page 18)

When a fax transmission or reception is already in progress, the following procedure can be performed to reserve a 

transmission job. To check reserved transmission jobs, display the job status screen.

☞

5. CHECKING THE STATUS OF FAX JOBS

 (page 48)

2

BASIC TRANSMISSION 

METHODS

• If memory becomes full while the first original page is being scanned, transmission will stop.

• In the following situations, the transmission will be automatically reserved (memory transmission)

• The connection cannot be made because the line of the other party is busy.

• The machine is already using the line to send or receive a fax.

• Another fax transmission was reserved ahead of your fax.

• One of the following functions is being used for transmission

Broadcast transmission, timer transmission, Dual Page Scan, 2in1, Card Shot, Job Build

• The document glass is being used for a transmission.

• Up to 94 transmission jobs can be reserved.

• When the transmission is finished, the scanned original pages are cleared from memory. However, the transmitted fax is 

stored when the document filing function is used.

☞

Document Filing Guide

System Settings for Fax (Administrator): 

Quick On Line Sending

 (page 180)

This can be used to disable Quick Online transmission. In this case, fax transmissions will be sent by memory transmission 

(reserved and then transmitted).

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

Transmission