Oce CS2024 Quick Start Manual - page 18
of
44
18
Chapter 1 Read this first
Installing the Output Stacker
Installing the Output Stacker
1.
With the front side (the side without lapels) of the output stacker cloth facing up, use
the holes on both ends of the cloth to attach the cloth to output stacker arm A (a) and
the output stacker arm B (b).
[41]
2.
From the rear as shown in the illustration, hook the holder (d) to the shaft of the
screw (c) on the top edge of the rear side of the stand stay, then insert the bottom of
the arm holder to the shaft of the screw (e) on the bottom of the stand stay.
[42]
c
e
d