Oce CS2024 Quick Start Manual - page 19
of
44
19
Installing the Output Stacker
3.
From within the left and right of rear output stacker arm B (b), insert firmly into the
installation holes of the arm holder (f), then insert the arm securely into the groove.
[43]
4.
Insert both ends of the output stacker arm A (a) into the center holes (g) of the stand
foot.
[44]
5.
Fasten the output stacker arm A with the arm stopper (h), fit the stabilizer (i) to the
back of output stacker arm A, and insert into the holes of the arm stopper (h).
[45]