Oce CS2024 Quick Start Manual - page 25
of
44
25
Installing the Printhead
4.
Pull the printhead lock lever completely forward to open it.
[57]
5.
Raise the printhead lock cover completely to open it.
[58]
6.
Hold the printhead by the grips (a) and remove it from its case, then remove the
orange protective cap 1 (b).
[59]
Attention:
The printhead contains protective nozzle ink. If ink leaks, it may soil
the printer or peripherals. It is recommended that the protective cap 2 (c) should
be removed on the box in which the printhead was packed. If ink does leak, wipe
the ink off with a dry cloth. This ink is harmless to the human body.