Oce em3521 Quick Manual - 1.3

1

Overview

1-8

cm3521

1.3

Setting up the system

In order to use this printing system, it must first be set up.

Setup consists of connecting this machine to a computer and installing the 

printer driver onto the computer being used.

To set up the printing system

Setup of the printing system as described below.

1

Connect this machine to a computer. (Refer to “Compatible interfaces” 

on page 1-6.)

2

Install the printer driver. (Refer to “Installing the printer driver” on 

page 2-1.)

3

When using a network connection, set up the network. (Refer to “Set-

ting up network printing” on page 3-1.)

4

Check the setup by printing a test page. (Refer to “Test printing” on 

page 4-4.)

5

Install the screen fonts.

–

The User Software CD-ROM and the PostScript Printer Driver CD-

ROM contain the Latin TrueType fonts as screen fonts.

–

Install the screen fonts after adding the operating system standard 

fonts.

–

For details, refer to Help of the operating system.

–

The CD-ROM “Screenfont” or “Screenfonts” folder contains the 

screen fonts.

–

The Macintosh fonts are compressed. Install the fonts after decom-

pressing them.

Installation of the printer driver may differ depending on the connection 

method used with this machine in addition to the operating system of the 

computer and the type of printer driver being used.

!

Detail 

For details on connecting this machine to a computer, refer to “Compat-

ible interfaces” on page 1-6.