Oce em3521 Quick Manual - page 34

Installing the printer driver

2

cm3521

2-11

15

Remove the CD-ROM from the CD-ROM drive.

This completes the printer driver installation.

Installing the printer driver using Plug and Play

For Windows 98SE

1

After using a parallel cable or a USB cable to connect this machine to 

a computer, turn on the computer.

–

Do not disconnect or connect the cable while the computer is start-

ing up.

2

Insert the Windows printer driver CD-ROM into the computer’s CD-

ROM drive.

–

PCL Driver: User Software CD-ROM

–

PostScript Driver: PostScript Printer Driver CD-ROM

3

Turn the main power of this machine on.

The Add New Hardware Wizard starts up.

4

Click the [Next] button.

5

Select “Search for the best driver for your device (Recommended)”, 

and then click the [Next] button.

6

Select “Specify a location”, and then click the [Browse] button.

7

Specify the folder on the CD-ROM that contains the printer driver for 

the operating system that you are using, and then click the [OK] button.

–

PCL Driver: User Software CD-ROM “Driver\35C-3” folder

–

PostScript PPD driver: PostScript Printer Driver CD-ROM 

“Driver\PS-PPD” folder

8

Click the [Next] button, and then follow the on-screen instructions.

If using a parallel connection, proceed to step 10.

9

The Add New Hardware Wizard dialog box appears again. Repeat 

steps 4 through 8.

10

When installation is complete, make sure that the icon of the installed 

printer appears in the Printers window.

11

Remove the CD-ROM from the CD-ROM drive.

This completes the printer driver installation.