Oce im2330 User Manual - 129

129

4

4. SETTING COPY FUNCTIONS

You can change the system behaviors for the copy operation, such as maximum number of copies, auto 2-

sided mode, and the sort mode priority.

1

Press the [COPY] button in the ADMIN menu.

• The COPY screen is displayed.

To display the ADMIN menu, see “1.ENTERING TO ADMIN MENU”.   P.87

2

Specify following items as required.

• MAXIMUM COPIES — Press the number button that indicates the maximum number of copies to be allowed.

• AUTO 2-SIDE MODE — Press the button of the 2-Sided mode that initially applies to copy settings when orig-

inals are set in the Automatic Document Feeder.  When the [OFF] button is selected, the initial setting of the 2-

Sided mode will be [1 -> 1 SIMPLEX] when originals are set in the Automatic Document Feeder.

When the [1->2] button is selected, the initial setting of the 2-Sided mode will be [1 -> 2 DUPLEX] when origi-

nals are set in the Automatic Document Feeder.

When the [2->2] button is selected, the initial setting of the 2-Sided mode will be [2 -> 2 DUPLEX] when origi-

nals are set in the Automatic Document Feeder. 

When the [USER] button is selected, the screen to select the 2-Sided mode will be displayed when originals 

are set in the Automatic Document Feeder.

• SORT MODE PRIORITY — Press the sort mode that applies prior for copy jobs.  If the [STAPLE] button is 

selected, the output is stapled on the upper left corner as the default.  To select the [STAPLE] button, the 

optional finisher must be installed.

3

Press the [Next] button to display the next screen.