Oce im2330 User Manual - page 62

58

2.MANAGING COUNTERS (COUNTER MENU)

4.MANAGING DEPARTMENT CODE (Cont.)

2

6

Enter new 5-digit code in the “New Code” field using the digital keys, 

and then press the [SET] button to set the entry.

• If you enter the code, asterisks (*) appear in the “New Code” field.

• If you want to clear the code to retype it, press the [CLEAR] button on the Control Panel.

• After pressing the [SET] button, the “Retype New Code” field is highlighted.

The department code must be the 5-digit code except “00000”.

If you want to return to the “Current Code” field to retype it, press the [RESET] button.

7

Enter new 5-digit code again in the “Retype New Code” field using the 

digital keys, and then press the [SET] button to set the entry.

• If you enter the code, asterisks (*) appear in the “Retype New Code” field.

• If you want to clear the code to retype it, press the [CLEAR] button on the Control Panel.

If you want to return to the “Current Code” field or “New Code” field to retype them, press the [RESET] button.

8

Press the [ENTER] button at the bottom of the touch panel.

• The LIMITATION screen is displayed.