Oce im2330 User Manual - 4. Setting Scan Functions

73

3

4. SETTING SCAN FUNCTIONS

You can change the initial setting (default setting) of scan job.

The [SCAN] button in the [USER] menu will be available only when the Scanner Kit is installed, or when 

the Printer/Scanner Kit is installed.

1

Press the [USER FUNCTIONS] button on the control panel to enter the 

User Functions menu.

2

Press the [USER] button, and then press the [SCAN] button on the 

touch panel.

• The SCAN screen is displayed.

3

Specify the following items as you require.

• In the “SINGLE/2-SIDE SCAN” option, press the desired mode button.

[SINGLE] — Press this to set single page scan as default scan mode.

[BOOK] — Press this to set book scan mode as default scan mode. This enables to scan both side of originals 

in the same direction.

[TABLET] — Press this to set tablet scan mode as default scan mode. This enables to scan front page in the 

general direction, and scan back page rotated 180 degree.

• In the “ROTATION” option, press the desired mode button.

• In the “ORIGINAL MODE” option, press the desired mode button applied for scans.

• In the “RESOLUTION” option, press the desired mode button applied for scans.

4

Press the [Next] button to display the next screen.