Oce im3511 Facsimile Operation Manual - page 5
4
■ Storing a forwarding table
Specify a sender and a forwarding destination to create a table (list) that combines the sender and the
forwarding address to which faxes from that sender are sent. The table will be added to the list of tables in the
"Inbound Routing Settings" screen. Up to 50 tables can be stored.
7
Click "Inbound Routing Settings" in the
menu frame.
The "Inbound Routing Settings" screen appears.
8
Click [Add].
The "Table Registration" screen appears.
9
Enter a table.
● Table Registration
Table Name:
The name that appears as the "Table Name" in
the "Inbound Routing Settings" screen.
Sender Number/Address Setting:
If you wish to have received faxes from all
senders forwarded, select "Forward All Received
Data". If you wish to forward the faxes of specified
senders, select "Forward Received Data from
Below Sender" and select the sender whose
faxes you wish to forward from the addresses
shown in "Sender Number/Address". Multiple
addresses can be selected using the Shift key or
the Ctrl key. Only an address that was stored in
steps 4 to 6 can be selected here.
● Forwarding Destination Settings
Forwarding Destination Setting:
Specify the destination to which received faxes
will be forwarded. Select the forwarding address
from one-touch keys or group keys stored in the
machine. Up to 1000 forwarding destinations can
be stored.
10
Click [Submit].
Jupiter2_IGI_Fax_Sheet(ZB3500590).fm 4 ページ ２００７年７月４日 水曜日 午前８時１４分