Oce im3512 Operation Manual - 4-2

4-2

CONVENIENT PRINTING 

FUNCTIONS

This chapter explains convenient functions for specific printing objectives.

The explanations assume that the paper size and other basic settings have already been selected. For the basic 

procedure for printing and the steps for opening the printer driver properties window, see the following section:

☞

Windows: 

BASIC PRINTING PROCEDURE

 (

page 1-2

)

☞

Macintosh: 

BASIC PRINTING PROCEDURE

 (

page 2-2

)

CREATING A BOOKLET (Booklet/Booklet Mode)

The booklet function prints on the front and back of each 

sheet of paper so that the sheets can be folded and 

bound to create a booklet. This is convenient when you 

wish to compile printed output into a booklet.

When a saddle stitch finisher is installed and saddle 

stitch printing and the staple function are selected, the 

output is automatically folded and stapled at the center. 

This allows you to conveniently use the output as a 

handout or booklet without the need for any further work.

(1) Configure the settings on the [Main] tab.

(2) Select [Booklet Mode]

The booklet printing method can be selected from the 

pull-down menu.

(3) Select the "Binding Edge".

[2 Staples] can be selected for "Staple" when a saddle 

stitch finisher is installed.

NOTE

In Windows, view printer driver Help for details on printer driver settings for each printing function.

NOTE

To use the saddle stitch print function, the duplex module is 

required.

Windows

(1)

(2)

(3)