Oce TDS100 Quick Reference Manual - page 10
10
Quick reference guide
The keys
Note:
Some functions may not be available on your Océ TDS100 due to the
differences in the configurations.
Nr.
Key
Function
6
'Media'
Select the media type.
7
'Feed'
Select the media feed method.
8
Exposure
Adjust the exposure.
Use the exposure setting to correct the background of
the copy.
9
'Strip'
Select the edge for the strip.
■
'Trailing'
Use the adjustment key to set the trailing strip length.
A positive value adds a strip, a negative value removes
a strip.
■
'Leading'
Use the adjustment key to set the leading strip length.
A positive value adds a strip, a negative value removes
a strip.
10
Adjustment
key
■
Adjust the strip length.
■
Adjust the media size for a new roll.
■
Adjust the media size for the standard cut size.
11
'Cut'
Select the cut method.
■
'Synchro' enables you to cut the copy to the same
size as the original.
■
'Standard' enables you to cut the copy to the same
size as a standard size. Use the adjustment key to set
the standard size.
12
Copies
Adjust the number of copies.
13
Stop
■
When you press the stop key while the copier runs
a copy job, the copy job will stop.
■
When you press the stop key once while you set up
a copy job, the number of copies returns to 1.
■
When you press the stop key twice while you set up
a copy job, the default values return.
14
Start
Start the copy job.