Ocean Aire 20AC series Engineering, Installation And Service Manual - page 2
TABLE OF CONENTS
PAGE
GENERAL DESCRIPTION
….................................
1
PRODUCT DATA AND SPECIFICATIONS
............
2
UNIT DESCRIPTION
Standard Features..................................
3
Applications / Operation..........................
4
Electrical..................................................
5
Use of Extension Cords...........................
6
Three Phase Monitor...............................
7
Condensate.............................................
8
Accessories………...................................
9 - 15
Installation................................................
16
Electronic Controller.................................
17-19
SERVICE
Replacement Parts Procedure.................
20
Troubleshooting Guide.............................
21
Preventive Maintenance...........................
22
Interior View.............................................
23
Piping Schematic......................................
24
DIAGRAMS
Wiring Diagrams.........................................
25 - 31
WARRANTY Statement.............................
32
FORWARD
This manual provides the user with basic details for the installation
and operation of the Oceanaire 2OAC spot cooler. It is recommend-
ed to read and fully understand the instructions outlined within this
manual, before operating the 2OAC unit.
As with all commercial air conditioning equipment, it is recommended
to have the 2OAC sized and installed by a licensed specifying engi-
neer and contractor, in accordance with all local and state codes.
The length of service received can be extended by following the
installation and preventive maintenance instructions.
NOTICE
In our ongoing process of continuous improvement, the items and
procedures described in this manual are subject to change without
notice. Please note model and serial number of the 2OAC
unit when contacting the factory.