Ocean Aire 20AC series Engineering, Installation And Service Manual - page 3
NOMENCLATURE
2O AC 24 1 2
DELUXE
PORTABLE
VOLTAGE
AIR-COOLED
SINGLE PHASE
NOMINAL
CAPACITY
CAPACITY RATING
12..........12,000 BTU/HR
18..........18,000 BTU/HR
24..........24,00 BTU/HR
36..........36,000 BTU/HR
60……...60,000 BTU/HR
GENERAL DESCRIPTION
The Oceanaire 2OAC is a portable air-cooled spot cooler designed
for permanent or temporary spot cooling or heating applications.
The entire air conditioning unit has been built in an premium sheet
metal cabinet, equipped with heavy-duty casters for mobility. All
2OAC models come with a 10-foot power cord for electrical connec-
tion and added mobility in service. These spot-coolers are designed
to direct air to specific areas or objects through a discharge grill lo-
cated on the upper-front of the unit, while rejecting heat from the top
of the unit. The 2OAC models range in cooling capacities from
12,000 BTU/HR to 60,000 BTU/HR to satisfy most space cooling
requirements.
The 2OAC is a self-contained unit with the entire cooling system,
evaporator and condenser fan motors and electrical components
neatly arranged in a gray polyester powder coated metal cabinet.
When connected to the proper source of electrical power, the 2OAC
is controlled by a solid-state electronic controller, with numerous
options of temperature and airflow controls that will provide the
desired level of comfort and cooling.
A wide variety of accessories and factory installed options are availa-
ble for the 2OAC units allowing for improved performance and added
versatility.
WARRANTY CARD
It is important that the warranty card be filled out completely and
returned to the factory within fourteen (14) days of installation of the
unit in order to receive the benefits of the warranty.
1