Ocean Signal V100 User Manual - Safesea V100 User Manual
3.5
Transmitting
Press the PTT key on the side of the radio to transmit. The
microphone is located under the speaker grille. Release
the key when you have finished talking.
It is good practice to keep transmissions
as short as possible. This will minimise
battery discharge and ensure that you
are not interfering with other users of
the channel.
Ensure the correct channel is selected
and that there is no other transmission
audible before pressing the PTT to
avoid interference with other users.
3.6
Volume Adjustment
To adjust the volume level of the speaker, press the VOL key.
The
or
keys may now be used to adjust the volume
Up or Down respectively. After two seconds of inactivity the
operation of the selection keys will revert to channel change.
3.7
Squelch Adjustment
To adjust the Squelch level, press the SQ key. The
or
keys may now be used to adjust
the Squelch Up or Down respectively. After two seconds of inactivity the operation of the
selection keys will revert to channel change.
The squelch should be adjusted to a level where background noise and
weak, unreadable signals do not open the mute.
Experience will show what the best setting is for the local environment.
8
SAFESEA V100 USER MANUAL
Part No. 912S-00957
Microphone