Ocean Signal V100 User Manual - Safesea V100 User Manual
To monitor a channel without adjusting squelch settings, press and hold the SQ key until a
double beep is heard.
The squelch will remain open while the key remains pressed and will
stay on for the time selected in the Menu after the key is released.
This mode may also be disabled in the Menu.
3.8
Lights Adjustment
To turn the lights on or off and adjust the level, press the
key. The
or
keys may now be used to adjust
the backlighting level from off through five levels to
maximum. After two seconds of inactivity the operation of
the selection keys will revert to channel change.
The lights will stay on for a period of 10sec (default) or as
set in the menu. Pressing any key will reactivate the lights.
3.9
Dual Watch
Press the D/W key to initiate the Dual Watch mode. The
radio will now start sampling the selected working channel
and channel 16 for signals.
Pressing the D/W or
key will terminate Dual Watch.
There will be no action if the radio is on
channel 16 when the D/W key is pressed.
3.10
Tri-Watch
Pressing and holding the D/W key for 1 second will initiate a
triple channel watch between the selected working channel,
the user programmed Call channel and channel 16.
Pressing the D/W or
key will terminate Tri-Watch.
A working channel and call channel
must have been entered before this key
press will have any action.
9
SAFESEA V100 USER MANUAL
Version 01.10 12/12/2011
HOLD
(1 sec)