Oceanic 4141 User Manual - User Controls
3
USER CONTROLS
5 of 13
Situated in the bottom right hand corner of the display are touch capacitive touch buttons, see
below:
3.1 DAY/NIGHT MODE DESCRIPTION
The “day/night button” switches between two modes. Every time the button gets pressed the
backlight toggles day/night mode. When the device is turned on it always starts the backlight in
MODE 1. The brightness of each mode gets saved when the device is turned off.
3.2 TO ALWAYS START THE SCREEN WITH THE BRIGHT DAY SETTING
Turn on the screen, adjust the brightness to the bright day setting (MODE 1), now press the
“day/night button”, and adjust brightness to the darker night setting (MODE 2), turn device off
From now on the screen starts with the bright day setting (MODE 1) and as soon as the “day/
night button” gets pressed switches into the darker night setting (MODE 2).
3.3 TO ALWAYS START THE SCREEN WITH THE DARKER NIGHT SETTING
Turn on the screen, adjust the brightness to the darker night setting (MODE 1), now press the
“day/night button”, adjust brightness to the bright day setting (MODE 2), turn device off
From now on the screen starts with the darker night setting (MODE 1) and as soon as the “day/
night button” gets pressed switches into the brighter day setting (MODE 2).
Button
Function
DIM
Each touch will decrement the brightness level, holding the
touch will continue to decrement until the minimum level
is reached.
BRIGHT
Each touch will increment the brightness level, holding the
touch will continue to increment until the minimum level is
reached.
DAY/NIGHT MODE
This toggle between Day and Night Mode (please see opera
-
tional description below)
ALARM MUTE
This will mute all current active alarm conditions
STANDBY
A touch of over half a second will turn the unit on, a long
touch of over two seconds will turn the unit off and into
standby.
DIM
BRIGHT
DAY/NIGHT
ALARM MUTE
STANDBY