1. DL manuals
  2. Octava
  3. Switch
  4. HDMX44-V1.3
  5. Installation Manual

Octava HDMX44-V1.3 Installation Manual

Summary of HDMX44-V1.3

  • Page 1

    1 installation guide model: hdmx44-v1.3.

  • Page 2: Contents

    2 contents application diagram ........................................................ 3 installation ....................................................................... 3 description ...................................................................... 4 features ................................

  • Page 3: Application Diagram

    3 application diagram installation: 1) connect hd display, a/v receiver to the hdmi outputs 2) connect the hdmi sources to the hdmi inputs 3) turn on hd display, a/v receiver, hdmi sources. 4) connect the dc power adapter to power on matrix.

  • Page 4: Description:

    4 description: the octava 4x4 hd matrix switch allows you to route 4 hd sources to any 4 hd displays! The 4x4 hdmi matrix allows 256 viewing combination of 4 hd sources on 4 hdtvs. You can create picture by picture or even have the same picture on all 4 hd screens. The 4x4 hdmi matrix switch is a co...

  • Page 5: Front View

    5 front view back view switch number 1 2 3 4 5 name edid switch edid switch edid switch edid switch programming/ lock switch function edid mode select edid mode select edid mode select edid mode select programming/ lock down= edid programming mode up= locked display a-d led indicators source 1-4 led...

  • Page 6

    6 led indication: the output led indicates the output that is selected. For example, if the output b led is on, then pressing channel buttons will switch the inputs to output b. Input 2 is switched to display b indicates the output that the input will be switched to. In this case hdmi out b.

  • Page 7: Remote Control Guide:

    7 pressing +/- increments/decrements to the next available source. Remote control guide: octava ’s remote control uses discrete code so can be easily in tegrated with most universal remote controls such as logitech’s harmony. Button function notes +, - increments/decrements to the next available sou...

  • Page 8

    8 basic quick start: use the remote control to select the display that you wish to control followed by the input (dvd, settop) that you wish to watch. For example: -pressing display b, “2” will switch input 2 to hdmi out b. -to connect diplay a to in1 and display b to in3 you simply follow this sequ...

  • Page 9: Rs232 Control Commands:

    9 rs232 control commands: the octava 4x4 hd matrix switch can be easily integrated with 3 rd party control systems via rs232 control. The following shows the control protocol for controlling the hdmx44. Rs-232 protocol baud rate 9600 data bits 8 parity check none stop bits 1 flow control none contro...

  • Page 10: Switching Commands

    10 switching commands note: the commands are in hex. No spaces between hex codes. Output a switching commands hex code select out a to input port 1 0x02 0x32 0x31 0x31 0x03 select out a to input port 2 0x02 0x32 0x31 0x32 0x03 select out a to input port 3 0x02 0x32 0x31 0x33 0x03 select out a to inp...

  • Page 11: Edid Configuration:

    11 edid configuration: the matrix is preloaded with 5 common edid configurations. It is recommended to keep the edid in the default factory mode 1 for most applications. Custom edid mode can be downloaded via usb. Contact us for this feature. To change the edid settings, please see section “ changin...

  • Page 12: Changing Edid Mode:

    12 changing edid mode: it is recommended to keep the edid in the factory default mode1. If necessary, you may set to different edid mode by following these instructions. Step action notes 1 disconnect all sources and display from matrix 2 set switch 1,2,3,4,5 to down position as shown 3 set the edid...

  • Page 13

    13 8 set the program/ lock switch #5 to lock position (up) 9 connect all video sources and displays to matrix and turn on . 10 re-power the matrix..

  • Page 14: 1 Ru Rackmount:

    14 1 ru rackmount: the octava 4x4 hd matrix switch can be installed in a 1 ru rack by simply installing the rack mounts included. Disabling /enabling front panel ir remote receiver: to disable the front panel ir remote receiver-insert the plastic plug into the ir jack as shown. Front panel ir receiv...

  • Page 15

    15 warranty octava warrants the equipment purchased to be free from defects in material and workmanship under normal use and service for a period of 1 year. In the event applicable law imposes any implied warranties, the implied warranty period is limited to 1 year from the date of receipt. If octav...

  • Page 16: Description

    16 description specifications model hdmx44-v1.3 hdmi inputs 4 hdmi outputs 4 in/out connectors 19 pin hdmi female type-a rs-232 control port 1 display selection remote, manual, rs232 video resolution 480 p, 720 i/p, 1080 i/p video data rate 6.75 gbps vertical frequency scan rate 24 / 50 / 60 hz dime...

  • Page 17

    17 all trademarks are the sole property of their respective companies.