1. DL manuals
  2. Octava
  3. Switch
  4. HDMX44-V1.3
  5. Installation Manual

Octava HDMX44-V1.3 Installation Manual

Summary of HDMX44-V1.3

  • Page 1

    Description specifications model hdmx44-v1.3 hdmi inputs 4 hdmi outputs 4 version 1.3 hdcp yes in/out connectors 19 pin hdmi female type-a rs-232 control port 1 display selection remote, manual, smart scan video resolution 480 p, 720 i/p, 1080 i/p video data rate 6.75 gbps deep color support yes ver...

  • Page 2

    Table of contents 1. Application diagram 2. Installation 3. Configuring smart scan tm 4. Description 5. Features 6. Remote control guide 7. Rs232 controls 8. Rs232 command table 9. 1 ru rackmount 10. Disabling / enabling ir remote control receiver 1.

  • Page 3

    Application diagram installation: 1) connect hd display, a/v receiver to the hdmi outputs 2) connect the hdmi sources to the hdmi inputs 4) turn on hd display, a/v receiver, hdmi sources. 5) connect the dc power adapter to power on matrix smart scan tm : octava’s hdmi switch with smart scan tm saves...

  • Page 4

    Configuring smart scan tm : the smart scan is disabled before shipment. It is recommended to leave smart scan disabled in most applications. To enable the smart scan tm 1) set the configuration switch #1 to the up position. 2) re-power the matrix. To disable smart scan tm 1) set the configuration sw...

  • Page 5

    1 ru rackmount : the octava 4x4 hdmi matrix switch can be installed in a 1 ru rack by simply installing the rack mounts included. Disabling /enabling front panel ir remote receiver: to disable the front panel ir remote receiver-insert the plastic plug into the ir jack as shown. Features:  watch any...

  • Page 6

    Hd video sources front view back view switch number 1 2 3 4 name smart scan switch edid switch edid switch programming/loc k switch function enable/disable smart scan edid mode select edid mode select programming/loc k down = smart scan off up= smart scan on down= edid programming mode up= locked 7 ...

  • Page 7

    Changing edid mode: it is recommended to keep the edid in the factory default mode1. If necessary, you may set to different edid mode by following these instructions. Led indication: the output led indicates the output that is selected (high priority). For example, if the output b led is on, then pr...

  • Page 8

    Pressing +/- increments/decrements to the next available source. 12 remote control guide: octava’s remote control uses discrete code so can be easily integrated with most universal remote controls such as logitech’s harmony. Edid configuration: the matrix can be configured to 3 edid settings. It is ...

  • Page 9

    8 11 rs232 command table: output a control output b control output c control output d control note: denotes start of text (0x2) denotes end of text (0x3) basic quick start: use the remote control to select the display that you wish to control followed by the input (dvd, settop) that you wish to watc...

  • Page 10

    Rs232 controls: the octava 4x4 hdmi matrix switch can be easily integrated with 3 rd party control systems via rs232 control. The following shows the control protocol for controlling the hdmx44. Baud rate=9600 data bits=8 parity check=none stop bits=1 flow control=none controlling the hdmx44 via rs2...