Description specifications model hdmx44-v1.3 hdmi inputs 4 hdmi outputs 4 version 1.3 hdcp yes in/out connectors 19 pin hdmi female type-a rs-232 control port 1 display selection remote, manual, smart scan video resolution 480 p, 720 i/p, 1080 i/p video data rate 6.75 gbps deep color support yes ver...
Table of contents 1. Application diagram 2. Installation 3. Configuring smart scan tm 4. Description 5. Features 6. Remote control guide 7. Rs232 controls 8. Rs232 command table 9. 1 ru rackmount 10. Disabling / enabling ir remote control receiver 1.
Application diagram installation: 1) connect hd display, a/v receiver to the hdmi outputs 2) connect the hdmi sources to the hdmi inputs 4) turn on hd display, a/v receiver, hdmi sources. 5) connect the dc power adapter to power on matrix smart scan tm : octava’s hdmi switch with smart scan tm saves...
Configuring smart scan tm : the smart scan is disabled before shipment. It is recommended to leave smart scan disabled in most applications. To enable the smart scan tm 1) set the configuration switch #1 to the up position. 2) re-power the matrix. To disable smart scan tm 1) set the configuration sw...
1 ru rackmount : the octava 4x4 hdmi matrix switch can be installed in a 1 ru rack by simply installing the rack mounts included. Disabling /enabling front panel ir remote receiver: to disable the front panel ir remote receiver-insert the plastic plug into the ir jack as shown. Features: watch any...
Hd video sources front view back view switch number 1 2 3 4 name smart scan switch edid switch edid switch programming/loc k switch function enable/disable smart scan edid mode select edid mode select programming/loc k down = smart scan off up= smart scan on down= edid programming mode up= locked 7 ...
Changing edid mode: it is recommended to keep the edid in the factory default mode1. If necessary, you may set to different edid mode by following these instructions. Led indication: the output led indicates the output that is selected (high priority). For example, if the output b led is on, then pr...
Pressing +/- increments/decrements to the next available source. 12 remote control guide: octava’s remote control uses discrete code so can be easily integrated with most universal remote controls such as logitech’s harmony. Edid configuration: the matrix can be configured to 3 edid settings. It is ...
8 11 rs232 command table: output a control output b control output c control output d control note: denotes start of text (0x2) denotes end of text (0x3) basic quick start: use the remote control to select the display that you wish to control followed by the input (dvd, settop) that you wish to watc...
Rs232 controls: the octava 4x4 hdmi matrix switch can be easily integrated with 3 rd party control systems via rs232 control. The following shows the control protocol for controlling the hdmx44. Baud rate=9600 data bits=8 parity check=none stop bits=1 flow control=none controlling the hdmx44 via rs2...