Octava HDMX44-V1.3 Installation Manual - page 10
RS232 Controls:
The Octava 4x4 HDMI Matrix Switch can be easily integrated with 3
rd
Party control systems via RS232 control. The following shows the
control protocol for controlling the HDMX44.
Baud rate=9600
Data bits=8
Parity check=None
Stop bits=1
Flow Control=None
Controlling the HDMX44 via RS232 can be done by send a series of
commands per the RS232 Command Table.
Protocol:
Example 1:
To Turn OFF the LED
Command =
Example2:
Switch Output C to view Input 3.
Command =
Note:
Basic controls
Note:
ASCII Command
Function
Port Status
Switch Control
(See Page 11)
Turn ON LED
Turn OFF LED
Turn ON Power
Turn OFF Power
Turn ON Smart Scan
Turn OFF Smart Scan
9
10