Octava HDMX44-V1.3 Installation Manual - page 9
8
11
RS232 Command Table:
Output A Control
Output B Control
Output C Control
Output D Control
Note:
Basic Quick Start:
Use the remote control to select the Display that you wish to control
followed by the Input (DVD, Settop) that you wish to watch.
For example:
-Pressing Display B, “2” will switch Input 2 to HDMI Out B.
-To connect DIPLAY A to IN1 and DISPLAY B to IN3 you simply
follow this sequence
Step 1) Display A, 1 (this will set Display A to Input 1)
Step 2) Display B, 3 (this will set Display B to Input 3)
Here are some more examples:
Output-Input
ASCII
Function Selection
A-1
Select OUT A to Input port 1
A-2
Select OUT A to Input port 2
A-3
Select OUT A to Input port 3
A-4
Select OUT A to Input port 4
Output-Input
ASCII
Function Selection
B-1
Select OUT B to Input port 1
B-2
Select OUT B to Input port 2
B-3
Select OUT B to Input port 3
B-4
Select OUT B to Input port 4
Output-Input
ASCII
Function Selection
C-1
Select OUT C to Input port 1
C-2
Select OUT C to Input port 2
C-3
Select OUT C to Input port 3
C-4
Select OUT C to Input port 4
Output-Input
ASCII
Function Selection
D-1
Select OUT D to Input port 1
D-2
Select OUT D to Input port 2
D-3
Select OUT D to Input port 3
D-4
Select OUT D to Input port 4
Output Selection
(Step 1)
Input Selection
(Step2)
Result
DISPLAY A
“2”
Display A switches to
Input 2
DISPLAY B
“1”
Display B switches to
Input 1
DISPLAY C
“2”
Display C switches to
Input 2
DISPLAY D
“1”
Display D switches to
Input 1
DISPLAY A
“+”
Display A increments to
next available Input
DISPLAY B
“-”
Display B decrements to
next available Input
DISPLAY C
“+”
Display C increments to
next available Input
DISPLAY D
“-”
Display D decrements to
next available Input