Octava HDMX44-V1.3 Installation Manual - Switching Commands
10
Switching Commands
Note: The commands are in HEX. No spaces between HEX codes.
Output A Switching Commands
HEX CODE
Select OUT A to Input port 1
0x02 0x32 0x31 0x31 0x03
Select OUT A to Input port 2
0x02 0x32 0x31 0x32 0x03
Select OUT A to Input port 3
0x02 0x32 0x31 0x33 0x03
Select OUT A to Input port 4
0x02 0x32 0x31 0x34 0x03
Output B Switching Commands
Select OUT B to Input port 1
0x02 0x32 0x32 0x31 0x03
Select OUT B to Input port 2
0x02 0x32 0x32 0x32 0x03
Select OUT B to Input port 3
0x02 0x32 0x32 0x33 0x03
Select OUT B to Input port 4
0x02 0x32 0x32 0x34 0x03
Output C Switching Commands
Select OUT C to Input port 1
0x02 0x32 0x33 0x31 0x03
Select OUT C to Input port 2
0x02 0x32 0x33 0x32 0x03
Select OUT C to Input port 3
0x02 0x32 0x33 0x33 0x03
Select OUT C to Input port 4
0x02 0x32 0x33 0x34 0x03
Output D Switching Commands
Select OUT D to Input port 1
0x02 0x32 0x34 0x31 0x03
Select OUT D to Input port 2
0x02 0x32 0x34 0x32 0x03
Select OUT D to Input port 3
0x02 0x32 0x34 0x33 0x03
Select OUT D to Input port 4
0x02 0x32 0x34 0x34 0x03
USB Service Port:
The USB port is for service and EDID updates if needed.
Contact us for this feature.
10
Set the switch to USB/Program
side as shown
.